A monitoring and data analysis method for microplastics in marine sediments.

In Europe, policy frameworks demand the monitoring of microplastics in marine sediments. Here we provide a monitoring and data analysis method for microplastic particles designed to be used in the context of Marine Strategy Framework Directive (MSFD) and OSPAR policy frameworks. Microplastics were analysed in marine sediments at four different locations in Dutch coastal and transitional waters using replicate sampling to investigate micro-spatial variation. Particle size distribution followed a power law with slope 3.76. Thirteen polymers were identified, with their composition varying between sediments near densely populated West coast areas versus the more rural Wadden Sea area. We quantify differences in the micro-spatial variation of microplastic concentrations between locations using the relative standard error of the mean (RSEM). This metric provides an opportunity to optimize the sensitivity of trend detection in microplastic monitoring networks by selecting locations with relatively low micro-spatial variation. We provide a method to optimize the number of replicate samples for a given location using its relationship with the RSEM. Two replicate samples appear to be cost-effective for relatively homogenous locations, whereas more heterogenous locations require four replicates.

Automated µFTIR Imaging Demonstrates Taxon-Specific and Selective Uptake of Microplastic by Freshwater Invertebrates.

Microplastic particles can be deposited to sediments and subsequently ingested by benthic organisms. It is unknown to what extent ingestion of microplastic is taxon-specific or whether taxa can be selective toward certain types of microplastics. Here, we used state-of-the-art automated micro-Fourier-transform infrared (µFTIR) imaging and attenuated total reflectance FTIR spectroscopy to determine small-size (20-500 µm) and large-size (500-5000 µm) microplastic particles in sediments and a range of benthic invertebrate species sampled simultaneously from the Dommel River in the Netherlands. Microplastic number concentrations differed across taxa at the same locations, demonstrating taxon-specific uptake, whereas size distributions were the same across sediments and taxa. At the site with the highest concentration, microplastic occupied up to 4.0% of the gut volume of Asellidae. Particle shape distributions were often not statistically different between sediments and taxa, except for Astacidea at one of the locations where the proportion of particles with a length to width ratio >3 (i.e., fibers) was twice as high in sediments than in Astacidea. Acrylates/polyurethane/varnish was predominately found in sediments, while soft and rubbery polymers ethylene propylene diene monomer and polyethylene-chlorinated were the dominant polymers found in invertebrates. Microplastic polymer composition and thus polymer density differed significantly between invertebrates and their host sediment. Trophic transfer at the base of the food web appears to have a filter function with respect to microplastic particle types and shapes. Together with the very high ingestion rates, this has clear implications for ecological and human health risks, where uptake concerns edible species (e.g., Astacidea).

Characterizing the multidimensionality of microplastics across environmental compartments.

Understanding the multidimensionality of microplastics is essential for a realistic assessment of the risks these particles pose to the environment and human health. Here, we capture size, shape, area, polymer, volume and mass characteristics of >60,000 individual microplastic particles as continuous distributions. Particles originate from samples taken from different aquatic compartments, including surface water and sediments from the marine and freshwater environment, waste water effluents, and freshwater organisms. Data were obtained using state-of-the-art FTIR-imaging, using the same automated imaging post-processing software. We introduce a workflow with two quality criteria that assure minimum data quality loss due to volumetric and filter area subsampling. We find that probability density functions (PDFs) for particle length follow power law distributions, with median slopes ranging from 2.2 for marine surface water to 3.1 for biota samples, and that these slopes were compartment-specific. Polymer-specific PDFs for particle length demonstrated significant differences in slopes among polymers, hinting at polymer specific sources, removal or fragmentation processes. Furthermore, we provide PDFs for particle width, width to length ratio, area, specific surface area, volume and mass distributions and propose how these can represent the full diversity of toxicologically relevant dose metrics required for the assessment of microplastic risks.

Toward the Systematic Identification of Microplastics in the Environment: Evaluation of a New Independent Software Tool (siMPle) for Spectroscopic Analysis.

Microplastics (MP) are ubiquitous within the environment, but the approaches to analysis of this contaminant are currently quite diverse, with a number of analytical methods available. The comparability of results is hindered as even for a single analytical method such as Fourier transform infrared spectroscopy (FT-IR) the different instruments currently available do not allow a harmonized analysis. To overcome this limitation, a new free of charge software tool, allowing the systematic identification of MP in the environment (siMPle) was developed. This software tool allows a rapid and harmonized analysis of MP across FT-IR systems from different manufacturers (Bruker Hyperion 3000, Agilent Cary 620/670, PerkinElmer Spotlight 400, and Thermo Fischer Scientific Nicolet iN10). Using the same database and the automated analysis pipeline in siMPle, MP were identified in samples that were analyzed with instruments with different detector systems as well as optical resolutions and the results discussed.

Microplastics in freshwaters and drinking water: Critical review and assessment of data quality.

Microplastics have recently been detected in drinking water as well as in drinking water sources. This presence has triggered discussions on possible implications for human health. However, there have been questions regarding the quality of these occurrence studies since there are no standard sampling, extraction and identification methods for microplastics. Accordingly, we assessed the quality of fifty studies researching microplastics in drinking water and in its major freshwater sources. This includes an assessment of microplastic occurrence data from river and lake water, groundwater, tap water and bottled drinking water. Studies of occurrence in wastewater were also reviewed. We review and propose best practices to sample, extract and detect microplastics and provide a quantitative quality assessment of studies reporting microplastic concentrations. Further, we summarize the findings related to microplastic concentrations, polymer types and particle shapes. Microplastics are frequently present in freshwaters and drinking water, and number concentrations spanned ten orders of magnitude (1 × 10-2 to 108 #/m3) across individual samples and water types. However, only four out of 50 studies received positive scores for all proposed quality criteria, implying there is a significant need to improve quality assurance of microplastic sampling and analysis in water samples. The order in globally detected polymers in these studies is PE ≈ PP > PS > PVC > PET, which probably reflects the global plastic demand and a higher tendency for PVC and PET to settle as a result of their higher densities. Fragments, fibres, film, foam and pellets were the most frequently reported shapes. We conclude that more high quality data is needed on the occurrence of microplastics in drinking water, to better understand potential exposure and to inform human health risk assessments.

Ingestion and Chronic Effects of Car Tire Tread Particles on Freshwater Benthic Macroinvertebrates.

Micronized particles released from car tires have been found to contribute substantially to microplastic pollution, triggering the need to evaluate their effects on biota. In the present study, four freshwater benthic macroinvertebrates were exposed for 28 days to tread particles (TP; 10-586 µm) made from used car tires at concentrations of 0, 0.1, 0.3, 1, 3, and 10% sediment dry weight. No adverse effects were found on the survival, growth, and feeding rate of Gammarus pulex and Asellus aquaticus, the survival and growth of Tubifex spp., and the number of worms and growth of Lumbriculus variegatus. A method to quantify TP numbers inside biota was developed and here applied to G. pulex. In bodies and faces of G. pulex exposed to 10% car tire TP, averages of 2.5 and 4 tread particles per organism were found, respectively. Chemical analysis showed that, although car tire TP had a high intrinsic zinc content, only small fractions of the heavy metals present were bioavailable. PAHs in the TP-sediment mixtures also remained below existing toxicity thresholds. This combination of results suggests that real in situ effects of TP and TP-associated contaminants when dispersed in sediments are probably lower than those reported after forced leaching of contaminants from car tire particles.

Quality Criteria for the Analysis of Microplastic in Biota Samples: A Critical Review.

Data on ingestion of microplastics by marine biota are quintessential for monitoring and risk assessment of microplastics in the environment. Current studies, however, portray a wide spread in results on the occurrence of microplastic ingestion, highlighting a lack of comparability of results, which might be attributed to a lack of standardization of methods. We critically review and evaluate recent microplastic ingestion studies in aquatic biota, propose a quality assessment method for such studies, and apply the assessment method to the reviewed studies. The quality assessment method uses ten criteria: sampling method and strategy, sample size, sample processing and storage, laboratory preparation, clean air conditions, negative controls, positive controls, target component, sample (pre)treatment, and polymer identification. The results of this quality assessment show a dire need for stricter quality assurance in microplastic ingestion studies. On average, studies score 8.0 out of 20 points for "completeness of information" and 0 for "reliability". Alongside the assessment method, a standardized protocol for detecting microplastic in biota samples incorporating these criteria is provided.